132
132 |Maintaining and Transporting the Printer
To change the language on the LCD screen, press d to highlight
LANGUAGE, then press r. Press d until you see the language you
want, then press OK to select it. The printer exits maintenance
mode and returns to normal operation.
To change the units of measurement, press d to highlight LENGTH
UNITS, then press r. Press d to switch from METRIC to
FEET/INCH, then press OK to select it. Press l when done.
To change the temperature units of measurement, press d to
highlight TEMPERATURE UNITS, then press r. Press d to switch
from C (Celsius or centigrade) to F (Fahrenheit), then press OK to
select it. Press l when done.
To change the number of times to perform and auto cleaning, press
d to highlight AUTO CLEANING TIMES, then press r. Press u or
d to increase or decrease the value (from 1 to 3).
To change the alert settings, press d to highlight MAINTENANCE
ALERT, then press r. Press d to choose an item to receive a
maintenance alert, then press OK to select it.
To choose whether or not to show remaining cut sheets, press d to
highlight CUT SHEET REMAINING, then press r. Press d to select
OFF or ON, then press OK to select the setting you want.
To select the number of minutes to wait until automatically
entering sleep mode, press d to highlight SLEEP MODE, then press
r. Press d to select 5, 15, 60, 120, or 180 MINUTES, then press
OK to select the setting you want.
To set the amount of idle time required until the printer
automatically powered off, press d to highlight POWER
MANAGEMENT, then press r. Press r to DISABLE or ENABLE
the POWER OFF TIMER, or press d to highlight TIME TO OFF,
press r, then press u or d to increase or decrease the value. Press
OK to select the setting you want.
To return all control panel settings to their default values, press d to
highlight DEFAULT PANEL, then press r to display EXECUTE.
Press OK to restore the default settings.
4. To exit maintenance mode, turn off the printer by pressing the Ppower
button. Press the Ppower button again to turn on the printer in the
normal operating mode.