Eton E100 Memory Auto-Scan, Moving A Stored Frequency, Deleting A Frequency Stored In Memory

WORKING WITH MEMORY continued

Memory Auto-Scan

Memory Auto-scan enables scanning through the memories within the selected memory page. Each filled memory is accessed for about 5 seconds, after which the scan move on to the next used memory automatically, staying on it for about 5 seconds. This continues indefinitely on the selected page until deliberately stopped. Unused memories are not accessed.

1.Press/release the M.Scan/Page button.

2.Press/hold either the Up/Hour or Down/Min. button for about 3 seconds. Then release it. Note that the memory number in the upper right corner of the display flashes and the preset being scanned remains for about 5 seconds. It then moves on to the next memory preset for another 5 seconds.

To stop memory preset auto-scan, press/release either the Up/Hour or Down/Min. button.

E100 OPERATION MANUAL

WORKING WITH MEMORY continued

MOVING A STORED FREQUENCY

If desired, a frequency that has been stored into a memory can be moved to a different memory on the same page, or a different page.

1.Turn on the radio.

2.Press/hold the M.Scan/Page button (7) for about 3 seconds and release it.

3.Use the Up/Hour or Down/Min. button (5,6) to select the required memory page.

4.Press/release the M.Scan/Page button twice.

5.Press/release the Mem.&Edit button (15).

6.Within 5 seconds use the numeric keypad to enter the memory number that you wish to store the station into.

7.Within 5 seconds press/release the Mem.&Edit button.

DELETING A FREQUENCY STORED IN MEMORY

1.Press/release the M.Scan/Page button (7).

2.Use the Up/Hour or Down/Min. button (5,6) to select the memory preset location of the frequency that you wish to delete.

3.Press/hold the Mem.&Edit button (15) for about 2 seconds and then release it. ‘dEL’ appears flashing in the display.

4.Within 2 seconds, press/release the Mem.&Edit button.

18 19