E100 OPERATION MANUAL
4GETTING STARTED
WHAT THE E100 INCLUDES
•Earbud style earphones
•Batteries
•Carrying pouch
NOTE: In the instructions below, numbers in parenthesis ( ), refer to the diagrams.
INSTALLING BATTERIES
Install 2 AA alkaline batteries into the battery compartment (25), observing the battery polarity diagram on the back of the radio. To remove the battery compartment cover, apply thumb pressure and slide it towards the bottom of the radio.
SELECTING AND USING AN AC ADAPTOR (MAINS ADAPTOR) - (not included)
Visit our web site, www.etoncorp.com, or Contact etón Corporation for information regarding selection of a proper AC adaptor.
SIGNAL STRENGTH AND BATTERY
STRENGTH INDICATOR
When the radio is turned off, the upper left corner of the display (2) shows battery strength on the
(33)under the battery symbol (26) on the far left side of the scale. When the radio is turned on, the pointer is under the antenna symbol
(27)and the
5BASIC RADIO OPERATION
IMPORTANT INITIAL SET-UP
1.Assure that the radio is unlocked, using the LOCK switch (24) on right side of the radio by pushing it down, to the OFF position. This switch can be used to lock the radio when it is not in use or when traveling. (Note that this does not deactivate the alarm feature).
2.Assure that the antenna gain switch (17), on the left side of the radio is in the
TURNING THE E100 ON AND OFF
The E100 can be turned on by the two methods shown below. To turn it off, press the POWER/SLEEP button (3).
1.Battery Saver/Timer Method
Perform a quick, short press of the POWER/SLEEP button (3). This turns the radio on with 120 in the display and causes the radio to shut off automatically after 120 minutes. The sleep timer symbol,
(35), also appears in the display. To change the automatic shut off time from 120 minutes to a time of your preference, use the Up/Hour or Down/Min. buttons (5,6) immediately after turning on the radio. This allows selection of 1 – 120 minutes of playtime before automatic
8 | 9 |