Eton E100 WORKING WITH MEMORY continued, Selecting/Changing Memory Pages, Direct Memory Access

E100 OPERATION MANUAL

WORKING WITH MEMORY continued

SELECTING/CHANGING MEMORY PAGES

If you are not interested in changing memory pages and wish to keep the original factory memory page setting, skip this section. At the factory, the E100 is set up to access memory page 1 when storing a frequency. You can leave this as-is or change to a different memory page. We suggest learning first to store stations into memory page 1 before changing to other pages. To do this, go to the previous section, STORING STATIONS INTO MEMORY.To change to the memory page, follow the directions below.

1.Press/hold the M.Scan/Page button (7) for about 3 seconds. Then release it. Note that the memory page (38) is flashing in the upper right corner of the display.

2.Within 5 seconds select the desired page with the Up/Hour and Down/Min. buttons (5,6). You will see the memory page change with each press. When the page of your choice is reached, stop pressing.

3.When finished, either press/release the M.Scan/Page button, or wait about 3 seconds, causing the memory page to be entered. The clock (34) will reappear in the display’s upper right corner.

WORKING WITH MEMORY continued

ACCESSING WHAT IS STORED INTO MEMORY

There are three ways to access what has been stored into memory: Direct Memory Access, Memory Search and Memory Auto-scan. These three methods are described below. When the memory page and memory preset numbers appear in the upper right corner of the display, as it will in the descriptions below, the radio is in MEMORY ACCESS MODE. This mode can be exited any time with a press/release of the M.Scan/Page button (7).

Direct Memory Access

If you are already on the desired memory page, simply key- in the memory number with the numeric keypad. For example, if the desired radio station is in memory number 01, just press ‘0’, then ‘1’, and it will go to memory 01.

If you first need to change memory pages, see the previous section,

SELECTING/CHANGING MEMORY PAGES.

Memory Search

Memory Search enables manual searching through the memories within a memory page, as shown below:

1.Press/release the M.Scan/Page button.

2.Use quick, short presses on the Up/Hour or Down/Min. buttons to search through the memories.

16 17