Eton FR370 owner manual 02CODE

SOLARLINKFR370 OWNER’S MANUAL

A six-digit code instructs the radio only to receive an ALERT when the code is programmed in. There are far too many S.A.M.E and CLC codes to include them all in this manual. We therefore provide the following to assist you in looking up the code for your area.

Look up a United States county code at the following web site: http://www.nws.noaa.gov/nwr/indexnw.htm#sametable

Look up a Canadian CLC code at: http://www.msc-smc.ec.gc.ca/msb/ weatheradio/transmitter/index_e.cfm Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be set to receive ALL coded information sent from any transmitter, if you’re within range. When you set codes, it will only pick up alerts when you’re in that county or within reception distance of the signal. ALL, MULTI or SINGLE COUNTY will appear in the lower left side of the display, depending on how you have set it.

1.In the radio off mode, press <MENU> button shortly and then press or to enter to “COUTY---ALL/SINGL/MULTI” mode.

2.Press or button shortly with “ALL”, “SINGL” or “MULTI” flashes, then press or button repeatedly to select from the three.

Select “SINGL” if you want to enter a code for a single area.

Select “MULTI” if you want to enter mutiple codes for different areas.

COUNTY --ALL

ALL COUNTY

3.Press or to start inputting county code.

4.Press or to set first code digit.

5.Repeat step 3. 4. all the other digits are set.

6.Press the <MENU> button to confirm and exit.

02CODE-----

ALL COUNTY

11