SOLARLINKFR370 OWNER’S MANUAL
DYNAMO POWER
(RECHARGEABLE Ni-MH BATTERIES)
The rechargeable Ni-MH (nickel-metal-hydride) battery is in the battery compartment. To use it plug the battery into the socket adjacent to it, then set the power switch to the DYNAMO position. You may have to charge the battery; to do this turn the crank for 90 seconds. The rechargeable battery will eventually lose its ability to hold a charge. Call Eton Corporation to order another one.
Ni-MH Batteries Socket
Ni-MH Batteries | AAA Batteries |
| Compartment |
DC-IN 5V AC ADAPTER (not included)
Plug in the AC adapter (5 Volt, positive polarity, 300 milliampere, not included) to the DC IN 5 volt socket. To charge the Ni-MH battery, set the <Power Supply> knob to “DYNAMO.” In the United States, an AC adapter can be purchased by calling 1-800-872-2228, 8 am - 4:30 pm, Pacific Time.
USB CABLE POWER
To charge the Ni-MH battery via the USB port (DC-IN), set the <Power Supply> knob to the “DYNAMO” position. Plug the USB cable port into the computer, plug the other port into the mini USB jack. The electricity will be powered into the Ni-MH batteries.
+ - +
