Eton Sound 100 Using The Headphones/Earphones, Selecting Am/Fm Or Line-In, Manual Tuning

ETÓN SOUND 100 OWNER’S MANUAL

USING THE HEADPHONES/EARPHONES

Before place Earphone/Headphone in/on you ears, turn the volume all the way down. Use Headphone/Earphone with 1/8 inch (3.5 mm) stereo plug. Plug them into the earphone socket on the back of the Etón Sound Radio.

SELECTING AM/FM OR LINE-IN

After turning on the radio, use sequential presses of the MODE but- ton on the radio or the remote to select AM/FM or LINE-IN.

MANUAL TUNING

Use quick, short presses of the TUNING/SET buttons to tune up + or down — frequency, or use the remote’s TUNE +/- buttons.

AUTO-SCAN TUNING

With auto-scanning the radio stops at the next station with good signal strength. Auto-scan tuning is engaged by a long, 2 second press of the TUNING/SET buttons. To auto-scan up frequency, press

-button. To auto-scan down frequency, press the + button, or use the remote’s TUNE +/- buttons.

WORKING WIT MEMORY PRESETS

There are 10 memory presets total, 5 each for AM, FM. Note that the procedures below will also overwrite what has been previously stored into the memory. That is, a memory cannot be ‘erased’, but can be overwritten.

1.Using the procedures described previously, tune to the radio station that you wish to store.

3