ANSWERS TO YOUR

QUESTIONS ON

AQUAGUARD CLASSIC -

PUMP MODEL

QA

Can one store water from Aquaguard Classic or use it directly?

Ideally, you should use water directly from the Aquaguard Classic. However, if you need to store the water, make sure you rinse the bottles or containers first with water from Aquaguard Classic and not with tap water. Even while drawing water, remember to rinse the tumbler with water from Aquaguard Classic.

How long and where should one store the water?

Water from Aquaguard Classic should be stored in a cool, clean place, preferably in steel or glass containers. Avoid matkas or filters as they tend to breed bacteria. Cover the container with a clean lid and ensure that the storage vessels are rinsed with water from Aquaguard Classic.

For hygienic reasons, it’s preferable to change the stored water at least after 2 days.

ultraviolet chamber is completely enclosed and no UV light is allowed to escape.

Also, UV light has no residual effect in water and hence it is totally safe.

Does Aguaguard Classic work even if the voltage fluctuates?

Aguaguard Classic has superior electronics, with a built-in voltage stabilizer, thus ensuring that your Aguaguard works even if the voltage goes down to as low as 160V. If however, the voltage drops below 160V, the yellow LED begins to blink and the alarm sounds, indicating your unit cannot be used temporarily.

Do you need to boil or filter water from the Aquaguard Classic?

Of course not. Aquaguard Classic is a complete purification system which gives you clear, safe water. Just fill your glass and drink!

Does drinking water from Aquaguard Classic make you lose your natural immunity?

Aquaguard Classic gives you clear, safe drinking water thus reducing the risk of exposure to water borne diseases. It does not affect your body’s natural immunity in any way.

Is UV (ultraviolet) light dangerous and is drinking UV treated water harmful?

Direct exposure to strong doses of UV light at a close range is dangerous. However, in Aquaguard Classic the

What will happen if Aquaguard Classic is switched on when the storage container does not have water?

Even though a thermal cut-off device is in-built in the machine to protect the pump from over heating, utmost care should be taken to always check the container for water before switching on the unit. Failing which the heating might lead to serious damage to the pump.

6

Page 9
Image 9
Eureka manual Answers to Your Questions on Aquaguard Classic Pump Model