Eureka manual Aquaguard Classic Pump Model Complete Water Purifier, UV Chamber

AQUAGUARD CLASSIC

PUMP MODEL - THE

COMPLETE WATER

PURIFIER

Aquaguard Classic is the most advanced water purification system using the principle of ultraviolet treatment. Before we go

on, take a look at the picture alongside. As you can see the Aquaguard Classic has the following components: a. In-built pump b. The Pre-filter (optional) c. Activated Carbon Chamber d. The Ultraviolet Chamber

e. The Electronic Monitoring System. Aquaguard Classic works simply, but effectively. The in-built pump pumps water from

a storage container which then passes through the following stages:

STAGE 1

THE PRE-FILTER

STAGE 2

ACTIVATED CARBON

STAGE 3

UV CHAMBER

The water first passes through the pre-filter which incorporates a specially developed multi-layered cartridge which strains out physical impurities present in the water, such as dust, dirt and mud.

In this stage, the water passes through specially treated, silver impregnated activated carbon which adsorbs colour, odour, organic impurities, and free gases like chlorine.

The next stage is where the water is subjected to the ultraviolet treatment which has been documented as a proven method for eliminating water borne disease causing bacteria and viruses. In fact, Aquaguard Classic’s ultraviolet germicidal dosage, even at its lowest, is 1.2 times of that required to destroy all known water borne disease causing organisms.

Aquaguard Classic has one more benefit. A unique Electronic Monitoring System which monitors

the purification process and stops the flow of water immediately, if the level of purification is inadequate.

So you see, the Aquaguard Classic is a complete water purification system that ensures you get clear, bacteriologically safe drinking water at all times.

Note: Kindly ensure that the source (storage container) has enough water before

you switch on your Aquaguard Classic.

4