WATER SPRAY
•Use the spray button to add moisture to stubborn wrinkles.
•First make sure that there is water in the tank.
•Press the spray button (3) slowly to get a jet spray. (Fig. 10)
•Press the spray button strongly and quickly to get a mist.
•Please note: If spray does not come out when you press the spray button, cover the spray opening with your finger and press a few times.
IRONING WITH STEAM
•As indicated on the temperature control dial (1) and the fabric table, steam ironing is only possible at the higher ironing temperature settings: •• for moderate or ••• for maximum steam.
•With conventional steam irons, water may leak from the soleplate if too low a temperature has been selected. However, your new steam iron has an “Anti- Drip” feature which will automatically stop the iron from steaming at too low a temperature. When this happens, you will hear a “Click”. Set the temperature control dial (1) to the advised position. Steaming will restart when the appropriate temperature has been reached.
•Ensure that there is enough water in the water reservoir.
•Place the iron on its stand (12) and set the temperature control dial (1) to the required position within the “steam area” (•• for moderate or ••• for maximum steam). (Fig. 11)
•After the thermostat light (7) has gone out and has come on again, you may start ironing.
•Slide the variable steam control (2) to the required position. (Fig. 12)
Fig. 10
Fig. 11
Fig. 12
12
