ATTACHING IRON TO THE IRONING BOARD
Your iron is equipped with a clamp that can be used to attach the iron stand (12) to your ironing board (or any other suitable surface). (Fig. 14.)
•Rotate the clamp 90°, so that it points down.
•Place the iron stand (12) next to the edge of the table with the clamp on the bottom.
•Turn the wing nut clockwise and then tighten it to the ironing board or table.
•Reverse the process when finished ironing to remove the iron from the ironing board or table.
IRONING BOARD
Fig. 14
SCREW
CLAMP
WING
NUT
15
