Euro-Pro S3601CO manual Getting Started, Assemble

Getting Started

English

When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark® Pro

Steam Pocket® Mop.

a

b c

d

e

h

i

jl

k

m

fig. 1

fg

aAll-Purpose Mop Head (1), XL Mop Head (1) and Triangle Mop Head (1)

bSteam Mop Body c Mop Handle

dTwo-Sided Micro-Fiber Cleaning Pads for the All-Purpose Mop Head (2), XL Mop Head (1)

and Triangle Mop Head (1)

e(1) 6mm x 54mm Large Screw* f Filling Flask

g Carpet Glider

hQuick Release Swivel Cord Wrap i Cord Clips

j Water Tank Cap k Water Tank

l ON/Standby Switch

m Mop Head Release Button

*Phillips or flat head screwdriver can be used. Screwdriver not included.

IMPORTANT: First things first, always make sure the mop is UNPLUGGED from the wall when not in use.

Never fill the mop, attach the mop head, change or remove the micro- fiber cleaning pad when the mop is plugged into the wall. To prolong the life of your Shark® Pro Steam Pocket® Mop, we recommend using distilled water. Make sure you only add water to the tank. Chemicals or cleaning solution may damage the appliance and could be unsafe for you and your family.

ASSEMBLE

1Insert the Mop handle end labeled “Front” into the steam mop body. Make sure it is inserted past the line printed on the pole. Secure the assembled handle and pole by using the large screw and a Phillips or a flat head screwdriver (screwdriver not included). (fig. 1)

2 TOLL FREE: 1-800-798-7398

S3601CO_IB_110117.indd 2-3

www.sharkclean.com 3

1/17/11 4:28 PM