PRECAUTIONARY MEASURES
OPERATING INSTRUCTIONS
IMPORTANT: If the suction opening in the unit or the hose is BLOCKED, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.
WARNING: Always remove the power plug from the wall outlet before assembling, installing or removing
Using the Vacuum Cleaner WARNING: Avoid leaving the vacuum turned on in one place for an extended
1.DO NOT operate the vacuum cleaner close to heaters or radiators.
2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.
3.DO NOT vacuum liquids.
5.When pulling out the power plug from the wall outlet, pull the plug not the power cord.
6.DO NOT pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.
7.DO NOT run appliance over power cord.
accessories or before performing any maintenance or trouble shooting.
Assembling Your Vacuum Cleaner
1.Lift the handle locking lever. (Fig. 1)
2.Insert the handle as far as it will go into the opening in the top of the main body. Make sure that the handle fits correctly into the opening.
3.Press the handle locking lever back down to lock the handle into place.
period of time as this may damage the carpet.
When using the vacuum cleaner, remove the power cord from the holders, clip the power cord to the power cord hook and ensure that the rest of the power cord doesn’t get in the way of the power nozzle when vacuuming. IMPORTANT: Always ensure that the vacuum cleaner is turned off before unplugging and plugging in.
1.Plug in the vacuum and press the On/Off pedal.
2.Depress the handle release pedal to release the handle. (Fig. 3)
Note: When using the attachments, place the vacuum in the upright position.
4.Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating beater brush and other moving parts.
8.DO NOT use without dust cup filter or filters in place.
9.Before you start vacuuming, make sure to remove large or sharp objects that might damage the vacuum.
Fig. 1
Winding & Unwinding the
Power Cord
This vacuum cleaner is equipped with a | Fig. 3 |
convenient cord storage feature. The |
|
power cord winds around the two cord |
|
holders at the side of the unit. The top |
|
cord holder has a quick cord release |
|
feature. Turn the top cord holder to the |
|
left or the right 180° to easily remove |
|
the power cord. (Fig. 2) |
|
To wind the power cord, make sure the |
|
quick release cord |
|
holder is in the upright |
|
position and wind the |
|
cord clockwise around |
|
the two cord holders. |
|
Note: Wrapping the |
|
cord with excessive |
|
tension could damage |
|
the cord. |
|
Fig. 2 |
|
3
4 |
