Euro-Pro owner manual Cordless Hand Sweeper, Care and Maintenance, Model V1707H Volt DC

CORDLESS HAND SWEEPER

Model V1707H

4.8 Volt DC

1.	On / Off Switch	6.	Charging Jack
2.	Charging Light Indicator	7.	Pivoting Telescopic Handle
3.	Dust Tray	8.	Charging Adapter
4.	Transparent Brush Cover	9.	Telescopic Handle Release Button
5.	Rotating Brush	10. Headlight (x2)

11.Charging Stand with Wall Mount Screws

Note: Illustrations may differ from actual unit.

NOTE: Cordless Hand Sweeper is shipped with the batteries uncharged. Charging of the unit for 24 hours prior to first use is required. Use replacement battery # XB1707H only.

Care and Maintenance

To improve the performance and life of your unit, we recommend you do the following:

1.Once a month clean the unit with a dry cloth, including the chamber into which the dust tray fits. Remove any hair, fiber or other materials that may have built up in the chamber and on the rotating brush.

2.Don't use abrasive materials to clean the hand sweeper. Do not immerse the unit in water.

3.Do not pick up liquids or use on wet floors.

4.Do not use on concrete, tar or similar rough surfaces .

5.Don't pick up pieces of string or fabrics with the sweeper.

6.Do not clean tasseled or frayed carpets with the sweeper.

7.To remove the squeegee, turn the screw plug a quarter turn counter clockwise and slide the squeegee out. Slide the new squeegee in and then turn the screw plug a quarter turn clockwise to lock the squeegee in place. For replacement squeegees, call 1 (800) 798-7398.

TROUBLESHOOTING GUIDE

PROBLEM		POSSIBLE REASON		POSSIBLE SOLUTION
	1.	Batteries discharged.	1.	Charge unit.
	2.	No power in electrical
SWEEPER WILL NOT			2.	Check fuse or breaker.
		outlet supplying
OPERATE				Replace fuse/reset breaker.
		transformer.
			3.	Call Customer Service.
	3.	Unit needs servicing.
SWEEPER WILL NOT	1.	Dust tray is full.	1.	Empty dust tray.
	2.	Unit needs recharging.	2.	Charge unit.
PICK-UP
	3.	Brush bar dirty.	3.	Clean brush bar.
DUST ESCAPING	1.	Dust tray is full.	1.	Empty dust tray.
FROM SWEEPER	2.	Brush bar dirty.	2.	Clean brush bar.
			1. Check for excessive material
ROTATING BRUSH	1.	Unit clogged.		on brush or in bottom of
				sweeper. Remove obstruction
WILL NOT PICK UP	2.	Dust tray is full.
				from brushes and/or sweeper.
			2. Empty and clean dust tray.
	1.	Electrical outlet not	1. Check to ensure outlet is
		working
				working properly. (Easily
	2.	Charging Adapter not
				checked by plugging in
SWEEPER WILL NOT		working
				another appliance.
CHARGE	3.	Batteries no longer
			2.	Replace charging adapter
		functioning
			3.	See battery disposal.
	4.	On/Off switch is in the ON
			4.	Depress On/Off switch.
		position.

2 7