CONNECTING AN ELECTRIC CABLE

If the cord is not long enough, or if a hard-wire installation is needed, follow the steps below to complete the electrical connection.

WARNING! Before working on wiring for any electrical appliance, be sure the electrical power has been turned off at the breaker/fuse box.

1.Remove the access panel by removing the two screws on each side of the access panel that hold the fill strips in place. Next, remove the two screws underneath the panel that hold it against the guard plate. After you have removed all four screws, slide the access panel down below the two tabs at the top to remove it.

2.Remove the toe kick brackets by holding the small metal spring tab on the outer edge of the base pan toward the outside of the machine. Continue holding the tab as you pull straight out on the bracket. (Note: It may be stubborn because it’s in guide slots on the base pan.) See page 10 for instructions on how to adjust the toe kick brackets.

3.Remove the guard plate by removing the three phillips-head screws that hold the guard plate in place, one on the upper/underneath side and two on the front.

After the screws are removed, grip the bottom of the guard plate and pull it toward you to remove it. You can now access the inlet valve, electrical connection, and drain pump and hose.

4.Remove the supplied power cord.

5.Connect supply cable with a UL-listed strain relief bushing (if nonmetallic cable is to be used).

6.Connect branch circuit white lead to white lead on main terminal block, as illustrated at right.

7.Connect branch circuit black lead to brown lead on main terminal block, as illustrated.

8.Connect ground wire to ground on terminal block, as illustrated.

9.Replace the guard plate.

10.Replace the toe kick brackets and toe kick (see page 9).

Toe kick bracket

Making the Connection

TESTING FOR LEAKS

1.Turn on the water supply and check for leaks.

2.Turn the power on at breaker/fuse box and test the dishwasher operation by running a Rinse cycle. (This should take about four minutes.)

3.Turn off the electrical power and check for leaks under the dishwasher and sink.

4.Make sure that no kinks have developed in the drain lines.

If there are no leaks and the dishwasher seems to be working properly, continue with the installation.

12

Page 11 Page 13
Page 12
Image 12
Eurotech Appliances EDW194E, EDW154E, EDW174E owner manual Connecting AN Electric Cable, Testing for Leaks
Page 11 Page 13

EDW174E, EDW154E, EDW194E specifications

Eurotech Appliances has built a reputation for delivering high-quality, energy-efficient kitchen appliances, and their dishwashers, namely the EDW194E, EDW154E, and EDW174E, are no exception. Each model brings a unique set of features and technologies tailored to meet the varied needs of modern households.

The Eurotech EDW194E dishwasher stands out for its spacious interior and superior cleaning efficiency. This model can accommodate up to 14 place settings, making it ideal for families and those who entertain frequently. Among its main features is the innovative EcoClean technology. This system optimizes the water and energy usage, ensuring that each wash is both effective and environmentally friendly. Additionally, the EDW194E is equipped with a silent operation mode, allowing you to run the dishwasher during the night without disturbing your household.

Moving on to the EDW154E model, this dishwasher offers a balance between performance and compactness. Ideal for smaller kitchens, it has a capacity of up to 12 place settings. One of the key technologies in this model is the TurboDry feature, which employs advanced drying techniques to ensure that dishes come out spotless and ready to use. The multi-program functionality allows users to choose from various cleaning cycles, including intensive, eco, and quick wash options, catering to different needs based on the load.

Finally, the Eurotech EDW174E combines efficiency with cutting-edge technology. It features SmartSense technology, an intelligent system that detects the load size and adjusts the water and energy consumption accordingly. This dishwasher also boasts an intuitive control panel, making it easy for users to select their desired settings. With a noise level of just 45 dB, the EDW174E operates quietly, allowing for seamless integration into any kitchen environment.

In summary, Eurotech's EDW194E, EDW154E, and EDW174E dishwashers reflect the brand's commitment to quality, performance, and user-friendly design. Whether you are looking for spaciousness, compactness, or advanced technology, these models provide reliable solutions for all your dishwashing needs. With their energy-efficient features and innovative technologies, Eurotech dishwashers not only make cleaning up easier but also contribute to a more sustainable lifestyle.
Top Page Image Contents