2.After enabling an event, you need to set a time zone in the SCHEDULE SETUP MENU. An event recording has to be included in a scheduled time zone. You can refer to SCHEDULE SETUP MENU to set up a time zone which you would like to record when an event occurs.
3.When the event and schedule are set, you can enter the CAMERA SETUP MENU to set the event recording speed (IPS) of a camera in the time zone you set.
Note: You can set the time zone from 00:00 to 00:00 daily in the SCHEDULE SETUP MENU, and set the normal record speed as 0 IPS in the CAMERA SETUP MENU if you only need events recording all the time.
4.4 ALARM INPUT RECORDING (Input trigger)
EDR1640/1620/920 provides a record function which is triggered by external signal via the 19th pin of the ALARM INPUT / OUTPUT port. When the record input signal is pulled low constantly, EDR1640/1620/920 will start to record. The system will stop recording when the record input signal is not pulled low.
Note: Please check APPENDIX C to see other available alarm input/output functions.
57
