EverFocus EDSR1600 instruction manual Back Panel Connections, On/Off, Video OUT

Back Panel Connections

2. Back Panel Connections

6	5	4	3	2	1
	EDSR-900

7	8	9	10	11	12	13		14
6	EDSR-1600					3	5	4	2	1

7 8 9 10 11 12 13 14

1	ON/OFF:	Main on/off switch.
2	AC100~240V	power socket.

3Matrix Outputs: These connectors are used for additional 4 programmable Call monitors. With these outputs, there are totally 5 programmable call monitors. These monitors can only display full screen as regular call monitor.

4	VIDEO IN:	BNC-sockets for composite signal video inputs, automatic 75 Ohm
		termination 1 ~ 16.
5	VIDEO OUT:	Loop through video outputs for each input channel.
		1 ~ 16)

6CALL MONITOR: BNC-socket Call (Spot) Monitor, composite signal. (Full screen display only)

7MAIN MONITOR: BNC-socket main monitor, composite signal. Main monitor provides Full screen, Multi-screen, Setup.

8S-VIDEO:Mini-DIN socket main monitor, S-Video signal. Main monitor provides Full screen, Multi-screen, Setup.

9AUDIO IN : 2 x Cinch socket audio input 500 mV max., 10 KOhm impedance.

AUDIO OUT: 2 x Cinch socket audio output 500 mV max. at 10 KOhm

3