EverFocus EFC--02-1-A user manual Set System PIN, Set Arm PIN, Erase All Events

Set Time __:__:__

Set System PIN

A System PIN must be entered before the user can make management changes via the controller keypad. The factory default System PIN is 000000. It is recommended that the password is changed after the initial log-in for maximum security. Be sure to keep the new password; if lost the system can only be accessed after purging all stored data using CLR on the keypad.

Under the System Setting Menu, press ENT to set system PIN.

Set SYS PIN

The LCD will display the following menu.

Input:

______

Enter a new system PIN. Enter it a second time to confirm. Press ENT to set the new system PIN. Pressing CLR at any time will exit the menu without changing the system PIN.

Set Arm PIN

Arm PIN must be entered before the controller can be armed or disarmed via controller keypad. The factory default arm PIN is 000000.

Under System Setting menu, press ENT at the window below to set arm PIN.

Set ARM PIN

The LCD will display the following menu.

Input:

______

Enter a new arm PIN. Enter it a second time to confirm. Press ENT to set the new arm PIN.

Erase All Events

The controller will record all events that occur, beginning immediately upon powering on. These events can be purged by following the instructions below. If the

37