EverFocus EPTZ900

1-11

1.5. EPTZ900/500 Quick Operation Guide (Work with EKB500)

EPTZ900/500 and EKB500 (Keyboard) can work together by using factory

default setting. You just need to connect cables by following the steps:

1. Connect the RS485 cable to EPTZ900/500 and a Keyboard (EKB500).

2. Connect a video cable from EPTZ900/500 to a monitor.

3. Connect the power to the EPTZ900/500 and a Keyboard (EKB500) .

After the speed dome finishes the self-test mode, you can start to operate the

speed dome via the keyboard.

To operate the EPTZ900/500:

IRIS

+Focus

F. Zoom

-N.Out

DOWN

LEFT RIGHT

Zoom INZoom OUT

1. Shift the Joystick up/down or right/left to view from camera.

2. Turn the top of the Joystick to zoom in/out.

3. Press Zoom In/Out, Focus F. /N. and IRIS +/- function keys to operate the

EPTZ900/500.

Contents

Main Table of Contents 1.EPTZ900/500 OVERVIEW ................................................ 1-3 2.EPTZ900/500 INSTALLATION ....................................... 2-12 3.EPTZ900/500 CAMERA SETUP MENU ......................... 3-28 4.EPTZ900/500 FUNCTION SETUP AND OPERATION ... 4-33 APPENDIX B: Protocol ............................................................ 4-37 1. EPTZ900/500 OVERVIEW Page 1.2. Specifications Page EPTZ900 EPTZ500 RELAY RELAY 1-10 1.4. EPTZ900/500 Connection EPTZ900/500 Page 2. EPTZ900/500 INSTALLATION Page Page 2-15 2-16 EVF - 1 PELCO-D PELCO-P TYPE-A 9600 BPS 4800 BPS 2400 BPS PALNTSC OFF ON Page Page RELAY M5 Bolt Hex Allen wrench GLOVE Page Page Page GLOVE Page 3. EPTZ900/500 CAMERA SETUP MENU OptionItems Page Page Page Page 4. EPTZ900/500 FUNCTION SETUP AND OPERATION Page Page 1 ~ 9 1 ~ 9 RELAY APPENDIX A: The Alarm I/O Connection 4-37 APPENDIX B: Protocol 4-38 4-39 4-40 EverFocus Electronics Corp.