ask you to enter the tour number you would like to run, and starts the tour after pressing Enter. To preset a tour before running it is necessary.

Note: The difference between the One-way tour mode and To-and-fro tour mode is their

return modes. For example: There is a tour with 3 preset positions 1, 2 and 3. The camera runs 1→2→3→1→2→3 in the One-way tour mode, and 1→2→3→2→1 in the To-and-fro tour mode.

4.5. Alarm Link to a Position/Tour

The EPTZ900/500 has 4 alarm inputs that can be set to link to a position or a tour when an alarm is triggered.

¾Set an alarm link:

Press F1 to set an alarm link. Enter the alarm number, and then press Enter. Switch the Joystick up/down to select a position or a tour, enter a position or tour number, and then press Enter to confirm the alarm link setting.

¾Delete an alarm link:

Press Clr + F1 to delete a link of alarm to position/tour.

4.6.Other operations

The EPTZ900/500 can work with a DVR that has PTZ control functions, and a matching protocol. The available control functions depend on different DVRs.

The EPTZ900/500 can work with a keyboard that has PTZ control functions, and a matching protocol. The available control functions depend on different keyboards.

4-35

Page 36
Image 36
EverFocus EPTZ900 user manual ¾ Set an alarm link, ¾ Delete an alarm link