EverFocus EPTZ900

2-24

2.4.3. EPTZ500 Dome Camera Installation

1. Take off the housing from the packing, and take off he PCB board (4 bolts on it) inside

the housing.

2. Cut the ceiling against the housing’s shape with a saw.

3. Thread the cable through the screw and the hole on the top of the housing, and tighten

up the screw to fix the cable

4. Place the housing into the hole that you just made. Fix the housing on the ceiling with

two clips, adjust the screws of clips to make the housing perfectly fit to the ceiling.

5. Connect the cable connectors to the nodes on the base board, and then fix the base

board in the housing by screwing 4 bolts on it.

RELAY JP5

Video +

Video -

RS485 +

RS485 -

AC24

Cut the ceiling

Contents

Main Table of Contents 1.EPTZ900/500 OVERVIEW ................................................ 1-3 2.EPTZ900/500 INSTALLATION ....................................... 2-12 3.EPTZ900/500 CAMERA SETUP MENU ......................... 3-28 4.EPTZ900/500 FUNCTION SETUP AND OPERATION ... 4-33 APPENDIX B: Protocol ............................................................ 4-37 1. EPTZ900/500 OVERVIEW Page 1.2. Specifications Page EPTZ900 EPTZ500 RELAY RELAY 1-10 1.4. EPTZ900/500 Connection EPTZ900/500 Page 2. EPTZ900/500 INSTALLATION Page Page 2-15 2-16 EVF - 1 PELCO-D PELCO-P TYPE-A 9600 BPS 4800 BPS 2400 BPS PALNTSC OFF ON Page Page RELAY M5 Bolt Hex Allen wrench GLOVE Page Page Page GLOVE Page 3. EPTZ900/500 CAMERA SETUP MENU OptionItems Page Page Page Page 4. EPTZ900/500 FUNCTION SETUP AND OPERATION Page Page 1 ~ 9 1 ~ 9 RELAY APPENDIX A: The Alarm I/O Connection 4-37 APPENDIX B: Protocol 4-38 4-39 4-40 EverFocus Electronics Corp.