EverFocus EZ180 Control Switches, FLFlickerless Normal/On, BLC Back Light Compensation Normal/On

„The 4 control switches are also located on the side circuit board, the switches in orders are for Flickerless, Back Light Comp, Auto Gain Control and Line Lock.

FL Normal	On
BLC Normal	On
AGC Off	On
LL Off	On

Control Switches

FL(Flickerless) Normal/On

When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electronic shutter at 1/100(NTSC) or 1/120(PAL) automatically, and reduce the flicker immediately. The default setting is Normal.

BLC (Back Light Compensation) Normal/On

When BLC is turned on, the AGC, ES and IRIS operating point is determined by averaging over the center area instead of entire field-of-view, so that a dimly-lit foreground object at center area can be clearly distinguished from brightly-lit backgrounds.

BLC should not be used unless it is needed to compensate for back-lit. The default setting is Normal.

8