EVGA 122-YW-E173 manual Fan Connections, PWR Control

Fan Connections

There are five fan connections on the motherboard. The fan speed can be detected and viewed in the PC Health Status section of the CMOS Setup. The fans are automatically turned off after the system enters S3, S4 and S5 mode.

Note that the CPU fan cable can be either a 3-pin or a 4-pin connector. Connect a 3-pin connector to pins 1, 2, and 3 on the motherboard connector.

CPU Fan Connector
3	2

4	3	2	GND
GND SENSE			+12V
PWR		CONTROL	SENSE

Auxiliary Fan Connector

EVGA nForce 750i SLI SPP/MCP Fan Connector

Install the fan over the nForce 750i SLI SPP to draw heat from the MCP. The fan plugs into a 3-pin connector.

3 2

GND +12V

SENSE

EVGA 19