EVGA 750i SLI manual Phoenix AwardBIOS Cmos Setup Utility Power Management Setup

EVGA

Power Management Setup

Select Power Management Setup from the CMOS Setup Utility menu and press Enter to display the Power Management Setup menu.

Phoenix – AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI function	[Enabled]
APCI Suspend Type	[S1&S3]
Power Management	[User Define]
Video Off Mehtod	[DPMS Support]
HDD Power Down	[Disabled]
Soft-Off by PBTN	[Instant-Off]
WOL(PME#) From Soft-Off	[Disabled]
WOR(RI#) From Soft-Off	[Disabled]
Power-on by Alarm	[Disabled]
x Day of Month Alarm	0
x Time (hh:mm:ss) Alarm	0 : 0 : 0
HPET Support	[Enabled]
POWER ON Function	[BUTTON ONLY]
x KB Power ON Password	Enter
x Hot Key Power On	Ctrl-F1
PWRON After PWR-Fail	[Former-Sts]

Item Help

Main Level

:Move Enter:Select +/-/PU/PD:Value	F10:Save ESC:Exit F1:General Help
F5: Previous Values	F7:Defaults

ACPI Function

This function on the Power Management Setup menu allows you to enable or disable the ACPI function.

ACPI Suspend Type

This function on the Power Management Setup menu allows you to select an ACPI Suspend Type. Types to select from are [S1&S3], [S1(POS)], and [S3(STR)].

Power Management

Use this to select your Power Management selection. The default is User define.

Max. saving: Maximum power savings. Inactivity period is 1 minute in each mode. Min. saving: Minimum power savings. Inactivity period is 1 hour in each mode.

User define: Allows user to define PM Timers parameters to control power saving mode.

HDD Power Down

Powers down the hard disk drive after a preset period of system inactivity.

The options are Disabled, 1min ~ 15min.

Soft-Off by PBNT

This function on the Power Management Setup menu allows you to set Soft-Off by PBNT to [Instant-Off] or [Delay 4 Sec].