EVGA 750i SLI PnP/PCI Configuration Menu, Mouse Left Mouse Right Any Key, Init Display First

EVGA

Mouse Left

Mouse Right

Any Key

PWRON After PWR-Fail

This item enables your computer to automatically restart or return to its last operating status after power returns from a power failure.

Off: The system stays off after a power failure. On: The system stays on after a power failure.

PnP/PCI Configuration Menu

Select PnP/PCI Configuration from the CMOS Setup Utility menu and press Enter to display the PnP/PCI Configuration menu.

Phoenix – AwardBIOS CMOS Setup Utility

PnP/PCI Configuration

Init Display First	[PCI Slot]
Reset Configuration Data	[Disabled]
Resources Controlled By	[Auto(ESCD)]
x IRQ Resources	Press Enter
PCI/VGA Express Snoop	[Disabled]
** PCI Express relative items **
Maximum Payload Size	[4096]

Item Help

Main Level

:Move Enter:Select +/-/PU/PD:Value	F10:Save ESC:Exit F1:General Help
F5: Previous Values	F7:Defaults

Init Display First

This function on the PnP/PCI Configuration menu allows you to define if the initial display is in the PCI slot or in the PCI Express slot. Options are [PCI Slot] and [PCIEx].

Reset Configuration Data

This function on the PnP/PCI Configuration menu allows you to enable or disable the resetting of Extended System Configuration Data (ESCD) when you exit Setup. Set this to [Enabled] if you have installed a new add-on and the system reconfiguration has caused a serious conflict that prevents the OS from booting. The default setting is [Disabled].