![Setting the SCSI ID with the DIP Switches](/images/new-backgrounds/83184/8318423x1.webp)
Setting the SCSI ID with the DIP Switches
To set the SCSI ID using the DIP switches, follow these steps:
1.Locate the SCSI ID DIP switches on the back of the tape drive, as shown in Figure 1.
2.Change the DIP switch settings to the correct SCSI ID for your configuration. Figure 2 shows the settings for SCSI IDs 0 through 7.
3.Make sure that the remote switch or jumpers are set to SCSI ID 0.
Figure 1 SCSI ID DIP switches and jumper block
12 | 306261 |