wait a few seconds and press the button again to eject the tape.
To unload a data cartridge, press the unload button on the tape drive’s front panel. The tape drive completes the current operation, writes any buffered data to tape, unloads the tape from the tape path, and ejects the cartridge.
Note: Some tape drives are configured to eject the tape immediately when the unload button is pressed. Refer to the
Error During Unload Procedure
If an error exists before or during the unload procedure, the unload sequence will be suspended and the amber LED will flash. If the unload button is pressed again, the unload sequence will be reattempted; however, unwritten data in the buffer will not be written to tape. The buffer and errors will be cleared.
28 | 306261 |