Exmark 000 & higher, 920 manual Recommended Maintenance Schedules

Models: 000 & higher

1 52
Download 52 pages 57.34 Kb
Page 24
Image 24
Maintenance

Maintenance

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)Manual background WARNING

While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.

Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

Manual backgroundManual background WARNING

The engine can become very hot. Touching a hot engine can cause severe burns.

Allow the engine to cool completely before service or making repairs around the engine area.

Recommended Maintenance Schedule(s)

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

 

After the first 5 hours

Change the engine oil.

 

 

After the first 100 hours

• Check the wheel hub torque specification.

• Check the wheel lug nuts.

 

 

 

 

After the first 250 hours

Change the hydraulic filter and fluid.

 

 

 

• Check the engine oil level.

 

Check the mower blades.

 

• Check the safety interlock system.

Before each use or daily

Check for loose hardware.

 

• Clean the engine and exhaust system area.

 

• Clean the grass and debris build-up from the machine and cutting deck.

 

• Clean the grass build-up from under the deck.

 

 

Every 40 hours

• Check the hydraulic oil level.

• Check the condition of the belts.

 

 

 

Every 50 hours

• Check the tire pressures.

• Check spark arrester (if equipped).

 

 

 

 

Every 80 hours

Remove engine shrouds and clean cooling fins.

 

 

 

Every 100 hours

Change the engine oil. (May need more often under severe conditions.)

 

 

 

Every 160 hours

Check the spark plugs.

 

 

 

Every 200 hours

Grease the lift linkage pivots.

 

 

 

• Replace the primary air cleaner element — check secondary air cleaner element; replace if

Every 250 hours

 

dirty. (May need more often under severe conditions. See the Engine manual for additional

 

 

information.)

 

 

 

• Replace the secondary air cleaner element. (May need more often under severe conditions.

 

 

See the Engine manual for additional information.)

Every 500 hours

Change the hydraulic filter and fluid (Every 250 hours/yearly if using Mobil 1 15W50)

 

• Check the wheel hub torque specification.

 

• Check the wheel lug nuts.

 

 

 

24

Page 24
Image 24
Exmark 000 & higher, 920 manual Recommended Maintenance Schedules