Exmark 000 & higher Dimensions, Torque Requirements, Tires & Wheels, Cutting Deck, Overall Width

Specifications

Tires & Wheels

	Drive	Front Caster
	Pneumatic	Semi-
	(Air-Filled)	Pneumatic
Quantity	2	2
Tread	Kenda K500	Smooth
Size	18x 8.50–8	11 x 4.00-5
Ply Rating	4
Pressure	14 psi
	(97 kPa)

Cutting Deck

•Cutting Width: 36 inches (91.4 cm)

•Discharge: Side

•Blade Size: (2 ea.): 18.00 inches (45.7 cm)

•Blade Spindles: Solid steel spindles with 1.00 inch (25.4 mm) I.D. bearings.

•Deck Drive:

–Electric clutch mounted on engine shaft.

–Blades driven by one belt (w/self-tensioning idlers).

•Deck: Full floating deck is attached to support frame, removable for service. Deck design allows for bagging, mulching or side discharge.

•Deck Depth: 5.0 inches (12.7 cm)

•Cutting Height Adjustment:

Adjusts from 1 inch (2.5 cm) to 5 inches (12.7 cm) in 1/4 inch (6.4 mm) increments

•Mulching Kit: Optional

•Bagger: Optional

Dimensions

Overall Width:

Deflector Up	39.1 inches (99.3 cm)
Deflector Down	48.0 inches (121.9 cm)

Overall Length:

Platform Up	61.5 inches (156.2 cm)
Platform Down	74.0 inches (188.0 cm)

Overall Height:

51.5 inches (130.8 cm)

Tread Width: (Outside to Outside of Tires, Widthwise)

37.6 inches (95.5 cm)

Curb Weight:

800 lb (363 kg)

Note: Weights will vary slightly depending on engine.

Torque Requirements

Bolt Location	Torque
Cutter Housing Spindle	130-160 ft-lb
Nut	(176-217 N-m)
Blade Mounting Bolt	50-60 ft-lb (68-81 N-m)
(lubricate with anti-seize)
Engine Deck/Mower	30-35 ft-lb (41-47 N-m)
Deck Support Mount
Bolts
Engine Mounting Bolts	17-23 ft-lb (23-31 N-m)
Wheel Lug Nuts	90-95 ft-lb (122-129 N-m)
Wheel Hub Nuts	175-225 ft-lb
	(237-305 N-m)
Wheel Motor Mounting	67-83 ft-lb (91-113 N-m)
Bolts

14