Exmark Lazer Z XS manual Hydrostatic Ground Drive System, Tires, Cutting Deck

2.6SEAT

2.6.1Type: Deluxe suspension seat high back, low profile foam-in-place cushion (dampened, adjustable spring suspension) and armrests, adjustable back angle.

2.6.2Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with scissor-type links.. Adjustable fore and aft seat track.

2.6.3Armrests: Molded adjustable flip-up armrests.

2.6.4Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

2.7HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1Hydrostatic Pumps: Two Hydro Gear PW variable displacement piston pumps.

2.7.2Wheel Motors: Two Parker/Ross with 1 1/4” tapered shafts.

2.7.3Hydraulic Oil Type: Synthetic Mobil 1 15W-50.

2.7.4Hydraulic Oil Capacity: 5.5 qt. (5.2 L.)

2.7.5Hydraulic Filter: Replaceable cartridge type.

P/N 103-2146: 25 microns, No bypass

2.7.6Speeds: 0-12.0 mph (19.3 km/hr) forward. 0-8.0 mph (12.9 km/hr) reverse.

2.7.7Drive wheel release valves allow machine to be moved when engine is not running.

2.8 TIRES		Drive
		Pneumatic (Air-Filled)
	Quantity	2
	Tread	“Multi- Trac C/S”
	Size	26 x 12.00-12
	Ply Rating	4
	Pressure	10 psi (90 kPa)

Front Caster

Semi-Pneumatic

2

Smooth

13 x 6.50-6

2.9 CUTTING DECK

2.9.1	Cutting Width:	60 in. (152.4 cm)
		72 in. (182.9 cm)

2.9.2Discharge: Side

2.9.3	Blade Size: (3 ea.) 60” Deck: 20.5 in. (52.1 cm)
	72” Deck: 24.5 in. (62.2 cm)

2.9.4Blade Spindles: Solid steel spindles with 1” I.D. bearings.

2.9.5Deck Drive: Electric clutch mounted on horizontal engine shaft. “B” Section belt (with self-tensioning idler) from electric clutch to transfer shaft mounted on deck.

Blades are driven by one “B” Section belt (w/self-tensioning idler) from transfer shaft on deck to blade spindles.

2.9.6Deck: Full floating deck is attached to out-front support frame. Six anti-scalp rollers provide maximum turf protection. Deck design allows for bagging, mulching or side discharge.

Deck Depth: 60” Deck: 5.5” (14.0 cm) 72” Deck: 5.5” (14.0 cm)

2.9.7Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the cutting height from 1 1/2” (3.8 cm) to 5” (10.2 cm.) in 1/4”(.64 cm) increments. The cutting height adjustment handle has a transport position and all adjustments can be made while the operator remains seated. Units also have a foot operated deck lift assist lever to aid in raising the deck.

2.9.8Mulching Kit: Optional.

-12 -