Maintenance
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
WARNING
While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.
Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).
Recommended Maintenance Schedule(s)
Maintenance Service | Maintenance Procedure | |
Interval | ||
| ||
|
| |
Before each use or daily | • Check for loose hardware. | |
• Check discharge gate closure. | ||
| ||
|
|
Periodic Maintenance
Check for Loose Hardware
Service Interval: Before each use or daily
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Visually inspect machine for any loose hardware or any other possible problem. Tighten hardware or correct the problem before operating.
Check Discharge Gate Closure
Service Interval: Before each use or daily
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Visually inspect that the discharge gate closes flat against the discharge opening. If not, reshape the discharge gate so it closes properly and completely.
Adjustments
Note: Disengage PTO, shut off engine, wait for all moving parts to stop, engage parking brake, and remove key before servicing, cleaning, or making any adjustments to the unit.
Handle Adjustment
The handle allows the gate to be held in any position. Adjust the tension of the pivot bolt and nut as shown in Figure 22 for more or less resistance.
16
