Exmark PNS24KA523 manual Dimensions, Hydrostatic Ground Drive System, Tires & Wheels, Cutting Deck

Specifications

armrests, integral safety switch, and seat vibration isolation system.

Optional seat accessories for units with standard seats:

–Custom ride suspension system to enhance Standard Seat. Adds approximately 3 inches (7.6 cm) to seat height.

–Deluxe suspension seat with high back, (dampened, adjustable spring suspension), armrests, and integral safety switch. Adds approximately 1/2 inch (1.3 cm) to seat height.

•Mounting: Adjustable fore and aft on seat tracks.

•Armrests: Molded flip-up armrests.

•Seat Safety Switch:

Integrated seat switch. Time delay seat switch eliminates rough ground cut-outs.

Hydrostatic Ground Drive System

•Two unitized hydrostatic transmissions: Hydro Gear ZT3100

•Hydraulic Oil Type: Exmark Premium Hydro Oil.

•Hydraulic Oil Capacity: 7.7 oz (2.3 L) per side

•Hydraulic Filter: P/N 109-3321

•Speeds:

–0-8 mph (12.9 km/hr) forward.

–0-5 mph (8.0 km/hr) reverse.

•Drive wheel release valves allow machine to be moved when engine is not running.

Tires & Wheels

	Drive	Front Caster
	Pneumatic (Air	Pneumatic (Air
	filled)	filled)
Quantity	2	2
Tread	Turf Master	Smooth
Size	22 x 9.50-12	13 x 5.00-6
Ply Rating	4	4
Pressure	13 psi (90 kPa)	13 psi (90 kPa)

Cutting Deck

•Cutting Width:

–44 inch Deck: (111.8 cm)

–48 inch Deck: (121.9 cm)

–52 inch Deck: (132.1 cm)

•Discharge: Side

•Blade Size:

–44 inch Deck: 22.25 inches (56.5 cm) – (2 ea.)

–48 inch Deck: 16.25 inches (41.3 cm) – (3 ea.)

–52 inch Deck: 18.00 inches (45.7 cm) – (3 ea.)

•Blade Spindles: Solid steel spindles with .98 inch (25 mm) I.D. bearings.

•Deck Drive: “B” Section belt with self-tensioning idler.

•Electric clutch: 175 ft-lb Mag Stop

•Deck: Full floating deck is attached to out-front support frame. Anti-scalp rollers provide maximum turf protection. Deck design allows for bagging, mulching or side discharge.

–44 inch Deck: 2 anti-scalp rollers

–48 inch Deck: 3 anti-scalp rollers

–52 inch Deck: 3 anti-scalp rollers

•Deck Depth:

–44 inch Deck: 5.0 inches (12.7 cm)

–48 inch Deck: 5.0 inches (12.7 cm)

–52 inch Deck: 5.0 inches (12.7 cm)

•Cutting Height Adjustment:

Foot activated lever is used to adjust the cutting height from 1 1/2 inch (3.8 cm) to 5 inches (12.7 cm) in 1/4 inch (6.4 mm) increments.

•Mulching Kit: Optional.

Dimensions

Overall Width:

	44 inch	48 inch	52 inch
	Deck	Deck	Deck
Without	45.8 inches	45.8 inches	45.8 inches
Deck	(116.3 cm)	(116.3 cm)	(116.3 cm)
Deflector	48.2 inches	50.7 inches	54.2 inches
Up	(122.4 cm)	(128.8 cm)	(137.7 cm)
Deflector	56.4 inches	59.5 inches	64.3 inches
Down	(143.3 cm)	(151.1 cm)	(163.3 cm)

16