Exmark TT23KAC, TT23KCC, TT20KCC manual Riding Attachments, Safety Signs

1.6 RIDING ATTACHMENTS

Use only Exmark riding attachments. The use of other than Exmark riding attachments may create a hazardous condition resulting in injury.

1.7SAFETY SIGNS

1.7.1Keep all safety signs legible. Remove all grease, dirt, and debris from safety signs and instructional labels.

1.7.2Safety signs must be replaced if they are missing or illegible.

1.7.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.7.4New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.

1.7.5Safety signs may be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

1.7.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

PART NO. 1-403005

LOCATION: LH & RH Front Top

Surface of Mower Deck

PART NO. 98-5954

LOCATION: Under LH, RH & Center Belt Shields

PART NO. 103-1541

LOCATION: Console

PART NO. 1-413214	PART NO. 1-403143
LOCATION: Right Side of Hydro Control Crank Arm	LOCATION: RH Rear Surface of Engine Deck

PART NO. 103-2239	PART NO. 1-603845
	LOCATION: Left Rear Top Corner
LOCATION: Top of Mower Deck Beneath Center Shield
	of Engine Deck
- 7 -