20 DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Control
NOTE: X1! = Address nnn.nnn.nnn.nnn
X1@ = DHCP 0 = off, 1 = on
Command ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
IP and serial port setup
Set IP address EX1!CI}IpiX1!] Default: 192.168.254.254
Read IP address ECI} X1!]
Set subnet mask EX1!CS}IpsX1!] Default: 255.255.0.0
Read subnet mask ECS} X1!]
Set gateway IP address EX1!CG}IpgX1!] Default: 0.0.0.0
Read gateway IP address ECG} X1!]
Set DHCP on or off EX1@DH}IdhX1@] Default: 0 (Off)
Read DHCP on/off status EDH} X1@]
Command and Response Table for IP-Specific SIS Commands