18 DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Control 19DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Control
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Channel mute commands
Channel mute X@*1B VmtX@*1]Mute output
X@
(no signal is output).
Channel unmute X@*0B VmtX@*0]Unmute output
X@
(signal is output).
Read channel mute X@BX$] 1 = mute on, 0 = mute off.
Global channel mute 1*B Vmt1]Mute all outputs.
Global channel unmute 0*B Vmt0]Unmute all outputs.
View output mutes EVM}X$1X$2 ... X$n]Each
X$
response is the mute status of an output,
starting from output 1.
n = the maximum number of outputs for your
configuration.
Save and recall presets
NOTE: If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.
Save current configuration as a
global preset
X%, SprX%] Command character is a comma.
Example: 9, Spr09]Save current ties as preset 9.
Recall a global preset X%. RprX%] Command character is a period.
Example: 5. Rpr05]Recall preset 5, which becomes the current
configuration.
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Information requests
Information request IVX^XX&•A0X0•SX*1X*2...X*n]
In the response:
V
X^
X
X&
shows the number of available inputs and
outputs for this configuration.
A0X0 has no meaning for this product.
S
X*
1
X*
2...
X*
n shows the board type installed in each
slot. n is the highest numbered board in your system,
4, 5, 8, or 9.
Request part number NX(] See the Extron website, www.extron.com, for part
numbers.
Request part number and board
configuration
*N X(.X*1X*2X*3...X*n]n is the highest numbered board in your system, 4, 5,
8, or 9.
Query controller firmware
version
QX1)]
Example: Q1.23]The factory-installed controller firmware version is
1.23 (sample value only).
NOTE: X@ = Output number 01 – maximum number of outputs for your conguration
X$ = Mute status 0 = not muted, 1 = muted
X% = Global preset number 01 – 32
NOTE: X^ = Inputs Total number of inputs for this switcher
X& = Outputs Total number of outputs for this switcher
X* = Board installed X0 = No board installed
C1 = 4 DVI inputs by 4 DVI outputs F1 = 4 ber inputs x 4 ber outputs
C2 = 4 DVI inputs by 0 outputs F2 = 4 ber inputs x 0 outputs
C3 = 0 inputs by 4 DVI outputs F3 = 0 inputs x 4 ber outputs
X( = Part number 60-nnnn-nn
X1) = Firmware version number to second decimal place (x.xx)