Extron electronic HFX 100 RX, HFX 100 TX manual HFX 100 Rx Rear Panel

COptical output connector — Connect one end of one multimode fiber optic cable (not provided) into this LC connector. The other end connects into the LC input connector on the HFX 100 Rx. The cable can be up to 984 feet (300 m) in length.

CAUTION:

•Possible Damage to Eyesight. The HFX 100 Tx outputs continuous laser (Class 1 rated), which may be harmful and dangerous to the eyes; use with caution. Do not look into the rear panel fiber optic cable connector or into the fiber optic cable itself. Plug the attached dust cap into the optical transceiver when the fiber optic cable is unplugged.

•Possible radiation exposure. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

HFX 100 Rx Rear Panel

a c

POWEERR	HFX 100 Rx
12V
----AAMAXX

INPUTI

OUTPUT

b

3 feet (0.91 m) DVI cable

Figure 5. HFX 100 Rx Rear Panel

A12 VDC power input — Connect the provided 12 VDC power supply to the front panel captive screw connectors. When power is provided to the unit but there is no HDMI input, the front panel lights amber.

See Figure 4, the attention points, and the notes on page 4 before connecting the power supply.

BHDMI output connector — Connect a HDMI display device to this male connector.

NOTE: With appropriate HDMI to DVI-D cables or adapters, the unit will output an HDMI signal.

HFX 100 • Panels and Cabling 5