Using the DSP Configurator™ Software
The MLS can be configured using the DSP Configurator software from the supplied DVD or downloaded from www.extron.com. To upload from the DVD:
Place the disc in the DVD drive and install the program onto a local PC that is connected to the MLS 608 D. To download from the Extron website:
1.At the home page, click the Download tab and click Software (at left side of page).
2.Navigate to the DSP Configurator file and click Download.
3.Log in with your Extron website account. If you do not have one, contact the Extron S3 Sales and Technical Support Hotline.
4.Download the file and install it on the PC.
To use the software, open the program and at the main window click Help, Contents (or press F1) and follow the instructions.
Basic Simple Instruction Set (SIS) Commands
The table below lists some basic SIS commands for the MLS 608 D. See the MLS 608 D User Guide for a complete SIS list.
Commands | ASCII command | Response | Additional description |
| (host to switcher) | (switcher to host) |
|
|
|
|
|
Input selection — video and audio | X!! | Chn X!] | Select video and audio from inputs |
|
|
|
|
Set program volume gain (dB) value | Ed1*X2(GRPM} | GrpmD01*X2(] | Set a program gain value to X2(. |
Examples: | Ed1*0GRPM} | GrpmD01*+00000] | Sets the program gain value to 0 dB. |
| Sets the program gain value to | ||
| Sets the program gain value to | ||
|
| ||
Increment gain | E d1*X2*+GRPM} | GrpmD01*X2(] | Increase program volume. |
Decrement gain | E | GrpmD01*X2(] | Decrease program volume. |
View master value | E d1GRPM} | X2(] | View the current program volume. |
|
|
|
|
Set Mic volume gain (dB) value | E d2*X2(GRPM} | GrpmD02*X2(] | Set a microphone volume gain value to X2(. |
Increment gain | E d2*X2*+GRPM} | GrpmD02*X2(] | Increase microphone volume. |
Decrement gain | E | GrpmD02*X2(] | Decrease microphone volume. |
View master value | E d2GRPM} | X2(] | View the current microphone volume. |
|
|
|
|
Turn power save mode off | E 0 PSAV} | Psav0] | Turn power save mode off. |
Turn power save mode on | E 1 PSAV} | Psav1] | Turn power save mode on. |
Query power save status | E PSAV} | 0 ] (or) 1 ] | View the current status (0 = off [default], 1= on). |
|
|
|
|
Reset all video and audio settings to | E ZXXX} | Zpx] | Resets all video and audio settings. |
factory default |
|
|
|
Reset all settings to factory default | E ZQQQ} | Zpq] | Resets all video and audio settings and protected |
|
|
| configuration settings. |
|
|
|
|
Enable Executive mode 1 | 1X | Exe1] | Lock the front panel buttons and knobs. |
Enable Executive mode 2 | 2X | Exe2] | Lock the front panel buttons only. |
Disable Executive mode | 0X | Exe0] | Unlock all the front panel. |
View Executive mode status | X | 0 ] (or) 1 ] | View the current status: |
|
| (or) 2 ] | 0 = off [default]; 1 = on, lock all buttons and |
|
|
| knobs; 2 = on, lock input buttons only. |
|
|
|
|
Mute HDMI audio output | 1Z | Amt1 ] | Mute HDMI audio output. |
Unmute HDMI audio output | 0Z | Amt0 ] | Unmute HDMI audio output. |
View HDMI audio mute status | Z | 0] (or) 1] | View mute status (0 = mute off, 1 = mute on). |
|
|
|
|
Mute overall volume output | E D5*1GRPM} | GrpmD05*1 ] | Mute overall volume output (1 = on). |
Unmute overall volume output | E D5*0GRPM} | GrpmD05*0 ] | Unmute overall volume output, (0 = off). |
View overall volume output status | E D5 GRPM} | +00000] (or) +00001] View mute status (+00000 = mute off, | |
|
|
| +00001 = mute on). |
|
|
|
|
NOTE: X! = Input connection, 0 – 8, 0 = no connection | |
X2* | = Incremental or decremental value in 0.1 dB steps, multiply by 10 (10 = 1.0 dB) |
X2( | = Master volume values, multiplied by 10 |
7