![Front Panel Operation](/images/new-backgrounds/114406/11440635x1.webp)
Front Panel Operation
The MPS switcher can be connected to as many as nine input devices and four output displays plus an audio amplifier. It operates in one of four switching modes: single (the default), separate,
The functions of the front panel controls are described in the following sections. Each input group; VGA/YUV,
Although the wiring and connection of the switcher are identical, the four modes operate differently.
Switcher Operating Modes
The switcher operating modes are:
•Single switcher (default) mode emulates one switcher with 9 inputs (9x1).
•Separate switcher mode allows the four groups of inputs (DVI, HDMI, VGA, Composite video) to be used as individual switches, creating four independent switchers.
•
•
NOTE: The switcher does not convert signal formats between VGA and DVI/HDMI
nor will it scale or convert between other input formats.
View Mode
The current switcher mode can be determined by observing the input LEDs. If the unit is in separate switcher mode, up to four input LEDs can be lit (one in each group). In single switcher mode only one input LED at a time is lit.
To view the current switcher mode, press and hold the Mode button (VGA/YUV #1) for more than 3 seconds.
| VGA/YUV INPUTS | DVI INPUTS |
| HDMI INPUTS |
| VIDEO INPUTS |
| ||
EXEC | 1 | 2 | 1 | 2 | 1 | 2 | 3 | 1 | 2 |
MODE | MODE | SINGLE | SEPARATE | COMBINE DVI/HDMI |
|
|
|
|
|
CONFIG |
|
|
|
|
|
Press & Hold | LED Lit: | LED Lit: | LED Lit: |
for 3 seconds | Single | Separate | Combine |
| Mode | Mode | Mode |
NOTE: Switcher is shown in
Figure 12. Front Panel button/LED functions during View mode
To change modes:
1.Press and hold the mode button for more than 3 seconds,
2.Press the button that corresponds to the desired mode change,
3.Release all buttons.
NOTE: Mode changes do not take effect until the Mode button is released.
MPS 409 • Operation | 12 |