Extron electronic MTP 15 HD A manual Potential damage to property

ATTENTION:

•Potential damage to property.

This product is intended to be supplied by a Listed Power Unit marked "Class 2" or "LPS", rated 12 VDC, maximum 1.0 A. Always use a power supply supplied or specified by Extron. Use of an unauthorized power supply voids all regulatory

compliance certification and may cause damage to the supply and the end product.

•The installation must always be in accordance with the applicable provisions of National Electrical Code ANSI/NFPA 70, article 75, and the Canadian Electrical Code part 1, section 16. The power supply shall not be permanently fixed to building structure or similar structure.

•Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling spaces or in wall cavities. The power supply is to be located within the same vicinity as the Extron AV processing equipment in an ordinary location, Pollution Degree 2, secured to the equipment rack within the dedicated closet, podium, or desk.

As an alternative, an Extron PS 124 Universal 12 VDC Power Supply (part number

60-1022-01) can power multiple MTPs or other Extron 12 VDC devices using only one AC power connector.

MTP 15HD A Series • Installation and Operation 13