1.If rubber feet were installed on the bottom of the case, remove them.

2.Mount the unit on the rack shelf, as shown below, using two 4-40 x 3/16 screws in opposite (diagonal) corners to secure the case to the shelf.

Under-desk mounting

Under-desk mount the unit using the optional mounting kit (part #70-077-01) as follows:

1.If rubber feet were installed on the unit, remove them.

2.Attach the mounting brackets to the unit with the provided machine screws, as shown below.

3.Hold the unit with the attached brackets against the underside of the table or other furniture. Mark the location of the screw holes of the bracket on the mounting surface.

4.Drill 3/32" (2 mm) diameter pilot holes, 1/4" (6.3 mm) deep in the mounting surface at the marked screw locations.

5.Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting surface until just less than 1/4" of the screw head protrudes.

6.Align the mounting screws with the slots in the brackets and place the unit against the surface, with the screws through the bracket slots.

7.Slide the unit slightly forward or back, then tighten all four screws to secure the unit in place.

P/2 DA4xi/6xi • User’s Guide

3

Page 6 Page 8
Page 7
Image 7
Extron electronic P/2 DA4xi s, P/2 DA6xi s manual Under-desk mounting
Page 6 Page 8

P/2 DA4xi s, P/2 DA6xi s specifications

Extron Electronics is known for its cutting-edge audio-video solutions, and the P/2 DA6xi S and P/2 DA4xi S distribution amplifiers are exemplary products in their lineup. These compact and reliable devices are designed to distribute high-quality analog video signals, supporting a variety of applications in educational, corporate, and institutional environments.

The P/2 DA6xi S is a six-output distribution amplifier, while the P/2 DA4xi S features four outputs. Both models are built to accommodate standard VGA and component video signals, ensuring compatibility with a wide range of sources. This makes them ideal for connecting computers, projectors, and other multimedia devices in a seamless manner.

One of the key features of these distribution amplifiers is their ability to maintain signal integrity over multiple outputs. Each output is independently buffered, allowing the devices to drive long cable runs without experiencing signal degradation or loss in quality. This is crucial in large installations where signals must travel considerable distances.

The P/2 DA6xi S and P/2 DA4xi S are also equipped with Extron’s unique Automatic Gain Control (AGC) technology. This innovative feature automatically adjusts the output level based on the input signal, ensuring consistent brightness and clarity across all outputs. Users can rest assured that their presentations will be visually consistent, regardless of the variations in source material.

Furthermore, these amplifiers come with a user-friendly design that simplifies installation. They feature Phoenix-style connectors for easy wiring and convenient mounting options for both rack and surface installations. For additional convenience, both models have front-panel LED indicators that provide real-time status feedback, making it easy to monitor operation at a glance.

In terms of power supply, the P/2 DA6xi S and P/2 DA4xi S units are designed for efficiency, utilizing an external power supply that minimizes heat generation while ensuring reliable performance. This focus on energy efficiency not only contributes to sustainability but also enhances the longevity of the devices.

In conclusion, the Extron P/2 DA6xi S and P/2 DA4xi S distribution amplifiers provide exceptional performance, flexibility, and ease of use, making them ideal choices for any professional audiovisual installation. With their robust features and advanced technologies, these devices ensure that users can enjoy high-quality visuals, making every presentation a memorable experience.
Top Page Image Contents