Extron electronic P/2 DA6xi s manual P/2 DA4xi and P/2 DA6xi, cont’d, 2P/2 DA4xi/6xi User’s Guide

P/2 DA4xi and P/2 DA6xi, cont’d

3.Mechanical loading — Mount the equipment in the rack so that uneven mechanical loading does not create a hazardous condition.

4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Give appropriate consideration to the equipment nameplate ratings when addressing this concern.

5.Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

Rack mounting procedure

The distribution amplifier can be mounted on any of the following optional rack shelves:

RSU 126 6" deep 1U Rack Shelf Kit (part #60-190-10) RSB 126 6" deep Basic Rack Shelf (part #60-604-10) RSU 129 9.5" deep rack shelf (part #60-190-01)or RSB 129 9.5" deep Basic Rack Shelf (part #60-604-01)

To install and set up the P/2 DA4xi or P/2 DA6xi on a rack, follow the steps on the next page and see the diagram below:

6" Deep Rack Shelf 1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

(2) 4-40 x 3/16 Screws

Use 2 mounting holes on opposite corners.

2P/2 DA4xi/6xi • User’s Guide