Extron electronic RGB 500 AKM manual Specifications, Video input, Video output, Sync, Audio

Specifications

Video

Gain	Unity (0.70V p-p), (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking
Bandwidth	300 MHz (-3dB)

Video input

Number/signal type	1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors
RGB 500 AKM
	1 9-pin D male, MBC/LBC cable or buffer
RGB 560 AKM
	1 15-pin HD female
Minimum/maximum levels	Analog	0.3V to 1.5V p-p with no offset
Impedance	75 ohms or High Z, switchable (set to 75 ohms if no local monitor is
	connected)
Horizontal frequency	Autoscan 15 kHz to 130 kHz
Vertical frequency	Autoscan 30 Hz to 120 Hz
Return loss	-30dB @ 5 MHz
Maximum DC offset	4.0V

Video output

Number/signal type	1 analog RGBHV, RGBS, RGsB
Connectors
All models	5 BNC female
RGB 560 AKM
	1 15-pin HD female for buffered local monitor output
Minimum/maximum levels	0.70V to 0.75V p-p with no offset and 0.7V p-p input
Impedance	75 ohms
Return loss	-30dB @ 5 MHz

Sync

Input type	RGBHV TTL (±), RGBS TTL (-), RGsB 0.3V (-), RsGsBs 1.3V (-)
Output type	RGBHV (±), RGBS(-), RGsB (-)
Input level	2V to 5.5V p-p with ±0.3VDC offset (max.)
Output level	4V to 5V p-p
Input impedance	10 kohms
Output impedance	75 ohms
Max. input voltage	5.7V p-p
Max. propagation delay	48 nS
Max. rise/fall time	3.5 nS
Polarity
AKM models	RGBHV	Polarity follows input when RGBHV is input and the
		sync polarity switch is set to Off. Sync polarity is
		negative if the sync polarity switch is set to On.
	RGBS, RGsB	Negative

Audio

Gain	Unbalanced 0dB, balanced +6dB
Frequency response	20 Hz to 20 kHz, ±0.05dB
THD + Noise	0.03% @1 kHz, 0.3% @ 20 kHz at rated maximum output drive
S/N	>90dB at rated maximum output (14dBm), balanced
Stereo channel separation	>95dB @ 1 kHz to 20 kHz

A-2 RGB 500 AKM and RGB 560 AKM Specifications