Extron electronic RGB 500 AKM, RGB 560 AKM manual Installation and Operation, Front Panel Features

Installation and Operation

Front Panel Features

2 3 4 5 6 7

MIN/MAX

AUDIO INPUT

H. SHIFT

HIGH Z

RGB 500 AKM with ADSP TM

8

1

Figure 2 — RGB 500 AKM front panel

2	3	6	7	9
		4
			AUDIO	INPUT
		H. SHIFT
	MIN/MAX		IDPIN 4 PINID 11	BUFFERED
				LOCAL OUT

RGB 560 AKM with ADSPTM

10 11

1

Figure 3 — RGB 560 AKM front panel

1Signal output and interface power cables — Five BNC female connectors for video output: red, green, blue, horizontal sync (black), and vertical sync (yellow); one 5-pole 3.5mm captive screw connector for audio output (see “Audio output connector” on page 2-6); and one 3-pole 3.5mm captive screw connector for 12–24V AC or DC power (see “Power connector” on page 2-7).

2Power indicator LED — The interface has a built-in autopower feature. When power is applied but no signal is present, the LED lights amber. When a signal is present at the video/sync input, the interface powers on, and the

LED lights green.

3

4

Min/Max LED — This LED lights briefly when the horizontal shift knob is turned to its minimum or maximum adjustment limit.

Horizontal shift knob — Use this knob to adjust the horizontal position of the display image left or right to center it each time a new computer is attached to the interface.

The horizontal shift control has no mechanical limits to rotation. When the minimum or maximum limit of the control is reached, the Min/Max LED lights briefly.

DDSP will disable horizontal shift control.

2-2 RGB 500 AKM and RGB 560 AKM Installation and Operation