To test the impedance of the entire speaker system, first disconnect the speaker wires from the amplifier and then measure the impedance from the disconnected wires, as shown below.
Amplifier
Red Wire (+) disconnected from Amplifier
Test Points
Black Wire | To next speaker |
from Amplifier |
|
_ _
Captive Screw
Connector
Impedance Test Points
ATTENTION: Disconnect the speaker system from the amplifier before performing this test, otherwise you may damage the test meter.
•Wiring a Single Speaker:
Connect the wires to the captive screw connector of the speaker, as shown below. Be sure to tighten the screws.
(Red) |
(Black)
Power Amplier
_ _
Speaker 1
SF 26X User Guide • Installation | 8 |