6.Attach speaker wires from the ceiling tile hole to the included
NOTES:
• Be sure that the combined impedance of the speaker system does not equal a value less than the rated minimum load impedance of the
amplifier.
• The maximum number of wires per terminal are as follows:
Wire Gauge Table
Number of Wires per | Maximum |
Connection Point | Wire Gauge |
|
|
|
|
1 | 12 AWG |
|
|
2 | 16 AWG |
|
|
• Do not tin the wires. Tinned wires do not hold tight in the captive screws and can break easily after several bends.
• Strip no more than 3/16" (5 mm) of insulation from the end of the wire before inserting it into the captive screw connector.
Do not tin the wires!
SF 26X User Guide • Installation | 4 |
