Extron electronic TP T A 45 user manual Quick Start Guide - TP T 15HD 45 / A, Step

Quick Start Guide — TP T 15HD 45 / A 45

CAUTION

Installation and service must be performed by authorized personnel only. These units must be installed in accordance with national and local electrical codes.

Step 1

Power off all devices and disconnect them from the power source.

Step 2

Connect the UTP cable from the receiver to the 8-pin connector on the TP T 15HD 45. To wire the connector, see Rear Panel Connectors in chapter 2 for the pinout table.

CAUTION

Do not connect the TP T 15HD 45 to a computer data or telecommunications network.

Step 3

Connect the external power supply to the transmitter.

Step 4

Using the 15-pin front panel HD connector, attach a computer input to the transmitter and a display output to the receiver. See the example application diagram below.

Extron

TP R 15HD A

Twisted Pair

Receiver

Ceiling

Projector

Mounting

Bracket

Mounting

Bolt

CAT 5/6 or

Extron

Skew-Free TM

UTP Cable

Up to 500 feet

Projector-mountable

Extron

TP T A 45

TP T 15HD 45

Twisted Pair

Transmitters

TP T 15HD 45 and TP T A 45 • Quick Start Guide QS-1