XTP T UWP 302 • SIS Configuration and Control 20
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Black signal for audio only
NOTE: The switcher uses a black signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal so audio can be
passed without video.
Enable black signal EB1AFMT}AfmtBX(] Enable a black signal for audio
only.
Disable black signal EB0AFMT}AfmtBX(] Disable the black signal.
View black signal setting EBAFMT}AfmtBX(] View the black signal setting.
Picture Adjustment Commands
Pixel phase
Set a pixel phase value EX1#PHAS}Phas X1#] Adjust the pixel phase to X1#.
Increment value E+PHAS}PhasX1#] Increase the pixel phase value.
Decrement value E-PHAS}PhasX1#] Decrease the pixel phase value.
View pixel phase value EPHAS}Phas X1#] Show the pixel phase value.
Horizontal shift
Set horizontal shift value EX1$ HCTR}HctrX1$] Set the horizontal location of
the first active pixel in the active
window.
Increment value E+HCTR}HctrX1$] Increase the shift value.
Decrement value E-HCTR}HctrX1$] Decrease the shift value.
View horizontal shift value EHCTR}HctrX1$] Show the horizontal location of
the first active pixel in the active
window.
Vertical shift
Set vertical shift value EX1$VCTR}Vctr X1$] Set the vertical location of the first
active pixel in the active window.
Increment value E+VCTR}VctrX1$] Increase the shift value.
Decrement value E-VCTR}VctrX1$] Decrease the shift value.
View vertical shift value EVCTR}VctrX1$] Show vertical location of the first
active pixel in the active window.
Preset Commands
Input presets
Save an input preset X1%, SprX1% ] Save the current configuration to
preset X1%.
Recall an input preset X1%. RprX1%] Recall the preset X1%
configuration.
NOTE: X( = Enable or disable 0 = disable
1 = enable (default)
X1# = Pixel phase 0-255 (128 = default)
X1$ = Horizontal or vertical shift 0-65535 (32768 = default)
X1% = Preset number 1-8