Instaltal lationandandOperation,cont’d

Installation

Rear panel features

1

2

3

4

7

6

5

Figure 1 — YCS SW6 MX rear panel

1AC power connector — One standard AC power connector attaches the switcher to any power source from 100VAC to 240VAC, operating at 50 or 60 Hz.

2Input BNC connectors — Six BNC female connectors for composite video input devices.

3Output BNC connector — One BNC female connector for a composite video output device.

4Remote connector — One 9-pin D female RS-232 connector that allows you to attach a host/computer, contact closure, or infrared remote control device to the switcher.

5Output 4-pin mini-DIN connector — One 4-pinmini-DIN female connector for an S-video output device.

6Switch module — DIP switch module that selects between composite video and S-video for inputs 1 – 4, and selects between NTSC and PAL.

1 — Input 1

Up — Input 1 is composite video.

Down — Input 1 is S-video.

2 — Input 2

Up — Input 2 is composite video.

Down — Input 2 is S-video.

3 — Input 3

Up — Input 3 is composite video.

Down — Input 3 is S-video.

4 — Input 4

Up — Input 4 is composite video.

Down — Input 4 is S-video.

5 — Not used

6 — Not used

7 — Not used

8 — Video standard

Up — Video standard is NTSC.

Down — Video standard is PAL.

7Input 4-pin mini-DIN connectors — Four 4-pinmini-DIN female connectors for S-video input devices.

Installation procedure

To install a YCS SW6 MX switcher, perform the following steps:

1If desired, mount the switcher in a rack (see “Mounting the switcher”, below). Otherwise, install the rubber feet (see “Installing the rubber feet” on page 2-4).

2Turn off power to the input and output devices ,and unplug the power cables from them.

3Attach the switcher to the input devices and output devices (see “Cabling” on page 2-4).

4Set the DIP switches on the switcher (see item 6 on page 2-2).

5If desired, attach an optional or third-party remote control device (see “Attaching remote control devices” on page 2- 5).

6Plug the switcher, input devices, and output devices into a grounded AC source, and turn on the input and output devices..

7The image from the selected input device should appear on the output device. If it does not, double-check steps 3 – 5, and make adjustments as needed.

Mounting the switcher

The YCS SW6 MX switcher can be rack mounted on one side of an optional 19”, 1U Universal Rack Shelf (Extron part number

60-190-01). To rack mount the switcher, do the following:

1.If feet were previously installed on the bottom of the switcher, remove them.

2.Mount the switcher on the rack shelf as shown in figure 2. Attach two 4-40 x 1/8 screws in opposite (diagonal) corners to secure the switcher to the shelf.

2-2

YCS SW6 MX • Installation and Operation

YCS SW6 MX • Installation and Operation

2-3

Page 5 Page 7
Page 6
Image 6
Extron electronic YCS SW6 MX user manual Instaltal lationandandOperation,cont’d Installation, Rear panel features
Page 5 Page 7

YCS SW6 MX specifications

Extron Electronics, a prominent name in the field of AV technology, has introduced the YCS SW6 MX, a high-performance switcher that caters to the increasing demands of modern audio-visual environments. The YCS SW6 MX is recognized for its outstanding versatility and reliability, making it a preferred choice for both educational and corporate settings.

One of the standout features of the YCS SW6 MX is its ability to support various video resolutions, including 4K, ensuring that it can handle today's demanding video content. This capability is essential for environments where high-quality visuals are critical, such as classrooms with interactive displays or boardrooms equipped with high-resolution projectors. The switcher also incorporates advanced scaling technology that allows for seamless conversion between different resolutions, ensuring a smooth user experience.

The YCS SW6 MX comes with six inputs and two outputs, allowing for flexible configuration options. This configuration makes it easy to connect multiple sources, such as laptops, document cameras, and other media devices, facilitating effortless switching during presentations or lectures. The built-in audio functionality supports various audio formats, providing an integrated solution that enhances the overall AV experience.

Furthermore, Extron has incorporated cutting-edge technologies in the YCS SW6 MX to ensure reliable operations. The switcher features HDMI 2.0 and HDCP 2.2 compliance, guaranteeing compatibility with the latest devices and content protection standards. Additionally, the inclusion of Extron's proprietary technologies aims to enhance signal integrity and reduce latency, further optimizing performance.

The user interface of the YCS SW6 MX has been designed with usability in mind. It offers a straightforward control mechanism, allowing operators to switch inputs or configure settings with ease. The device can be controlled via Extron’s extensive range of control solutions, including touch panels or third-party control systems, providing flexibility in management.

Robust built-quality is another characteristic of the YCS SW6 MX. Designed for durability and longevity, this switcher is an ideal investment for institutions seeking reliable performance over time. With its combination of cutting-edge technology, comprehensive features, and high-quality construction, the Extron YCS SW6 MX stands out as a powerful tool that meets the evolving demands of audio-visual applications.
Top Page Image Contents