Faber Remote Blower Lighting Unit Installation Scheme, Top Or Bottom Air Outlet Configuration

Models: Remote Blower

1 16

Page 9

LIGHTING UNIT LOWER BORDER SHALL BE INSTALLED AT THE MINIMUM DISTANCE OF 34 9/16 IN. ABOVE THE COOKING SURFACE.

With the aid of the drilling template provided mark the necessary holes and drill them.

The hood is manufactured with the air outlet at the top.

•Fit the flange with non-return valve onto the air outlet position of the built-in hood body case.

•In case of the bottom air outlet configuration turn the built-in hood body case 180° before fixing it to the wall.

Image 9

Contents

READ AND SAVE THESE INSTRUCTIONS ConceptRemote Blower INSTALLATION CHARACTERISTICSMAINTENANCE CONTENTSWARRANTY & SERVICE READ THESE INSTRUCTIONS BEFORE YOU START INSTALLING THIS RANGEHOODUSE AND CARE INFORMATION ELECTRICAL REQUIREMENTSDucted fans must always be vented to the outdoors Dimensions CHARACTERISTICSComponents Q.tyDistance from the Hob Dimensional chart - HoodDimensional chart - LIGHT HOOD INSTALLATION SCHEME INSTALLATIONCALCULATE THE DUCTRUN LENGTH 3-11/32TOP OR BOTTOM AIR OUTLET CONFIGURATION LIGHTING UNIT INSTALLATION SCHEMEREAR AIR OUTLET CONFIGURATION Built-in hood body case installationBEFORE INSTALLING THE HOOD IT WILL BE NECESSARY TO WAIT FIXING INTO THE BRICK WALLHood body installation hood wiring Lighting unit installationlight wiring purple wiring red wiring greenELECTRICAL SHOCK HAZARD Electrical connectionCLEANING METAL GREASE FILTERS MAINTENANCEControl Panel Grease filtersLIGHT REPLACEMENT Electric DiagramLighting 20 W halogen light43600249902