Lighting unit installation
•Provide for passage of the electrical connection wires with the hood body.
•Slide the top cover downwards, unfastening the two side screws and taking care not to scratch the tubular support members.
•Insert the 4 plugs D into the earlier drilled holes.
•Decide the height of the light; loosen the grub screws on the outer columns to allow the light to slide up and down. Take care not to scratch the columns when sliding.
•Fasten the light to the ceiling using 4 screws C.
•Fix the two support arm connection bushes to the wall..
•Make electrical connection:
•Connect the red wire in the
•Connect the green ground wire to the unused, green ground screw.
•Replace the top cover, fixing it in place with the two side screws.
•Screw the support arms into their housings.
•Hook them to the connection bushes and lock them in position with the grub screws provided.
•Close the bush using the masking plug provided
hood wiring | green | |
ground | ||
| ||
| screw |
light wiring
purple wiring 
red wiring
12 |
| EN |
